Calibration
Calibration
Alliance Infinite Calibration laboratories are ISO 17025:2017-accredited and equipped with the latest range of instruments operated by experienced metrologists aided by reporting from the Laboratory Information Management System (LIMS).
Alliance Infinite objective is to provide our customers demonstrably reliable instruments for higher accuracy and precision. Our extensively-trained metrologists use the most up-to date standards to calibrate equipment.
Technical Univariate Verification International WLL expertise in metrological measurements allows the company to offer services in the following measurement areas
1. Electrical
2. Mass & Weights
3. Acoustics
4. Vibrations
5. Force
6. Pressure
7. Dimensional
8. NDT Equipment
9. Nuclear
10. Thermal
11. Mechanical
12. Civil Equipment
13. Chemical & Analytical Equipment
The diverse range of TECHNICAL UNIVARIATE VERIFICATION INTERNATIONAL WLL capabilities allows us to carry out calibrations for most industry equipment, including on-site calibrations.
Your accuracy is our business!
Dimensional
Our capabilities include:
- 1-2-3 Blocks
- Angle Blocks
- Balances
- Bench Micrometers
- Bore Gauges
- Cables
- Caliper Checkers
- Calipers/Verniers
- Crimpers
- Depth Micrometers
- Dial Indicator (C)
- Dimensional Tapes
- Durometers
- Wire Gauges
- Electronic Gauges
- End Rods/L/S
- Feeler Gauges
- Gram Gauges
- Height Gauges
- Hardness Testers
- Angle Plate
- Levels
- Micrometers
- Microscopes
- Parallels
- Profilometers
- Gauge Blocks to 20 in.
- Viscometers
- Protractors
- Pull Testers
- Ring Gauges
- Riser Blocks
- Rules
- Scales
- Glass Scales
- Screw Pitch Gauges
- Pin Gauges
- Plain Plug Gauges
- Torque (D/W)
- Torque Presets
- Torque Standards
- V Blocks
- Sine Bars
- Sine Plates
- Squares
- Surface Testers
- Surface Plates
- Tape Measures
- Telescoping Gauges
- Thickness Gauges
- Thread Plugs
- Thread Ring Gauges
- Toolmaker’s(M)
- Weights
- Wires (Thread)
Thermodynamics
Alliance Infinite has developed temperature mapping procedures and calibration reports to adhere to ISO/IEC 17025 requirements. Implementation of the Calibration Services Technical Manual and Equipment Calibration Services Quality Manual ensures our continuing adherence to these international standards. With the direct comparison method, we are capable of producing highly accurate and consistent results across the entirety of our temperature calibration scope. Temperature measurement plays a crucial role in almost every industrial sector.
Our capabilities include:
- Autoclaves
- Freezers
- Infrared Thermometers
- RTDs
- Furnace calibrations
- Temperature Controllers
- Incubators
- Temperature Humidity D/L
- Humidity Meters
- Incubators
- Ovens
- PRTs
- Hygrothermographs
- Environmental Chambers
- Hygrometers
- Thermocouples
- Temperature/RH Chart Recorders
- Thermometers
- Environmental Chambers
- Temperature Mapping/Profile
- Refrigerators
- Temperature Dry Wells
- Temperature Baths
- Temperature/RH Meters
- Temperature Blocks
Our capabilities include:
- Accelerometers
- Resistors
- Ammeters
- Light Meters
- Capacitors
- Logic Analyzers
- Sound Level Meters
- Rectifiers
- Power supplies
- Megohmmeters
- Spectrophometers
- Decade LCR Box
- Multifunction Calibrators
- Digital Multimeters (DMM)
- Mulitimeters
- Static Meters
- Inductors
- Ionizers
- Conductivity Meters
- Variable Auto Transformers
- Stopwatch & Timers
- Gaussmeters
- Panel Meters
- Tachometers
- pH Meters
- Resistivity Meters
- Oscilloscopes
Mechanical
Our mechanical calibration services cover a number of metrology disciplines including: Length, Force, Mass, Torque, Vibration, Pressure and Viscosity. The laboratory is housed within a temperature controlled environment to maintain thermal stability of both the reference standards and instruments under test.
We realize the performance and accuracy of your mechanical, dimensional and physical test equipment is critical to your organization success so we use high quality, reliable reference standards for our calibration tasks. We pride ourselves on providing professional mechanical calibration services to ensure your measurement instruments are accurate, reliable and traceable. Due to the frequent handling, mechanical shock and exposure to various atmospheric conditions, it is inevitable that mechanical instruments will be subject to drift. To understand this drift during its’ operational service, a regular calibration schedule is required to determine the measurement shift between subsequent calibrations and to determine tolerance limits for the measurement uncertainty budget. Force Gauge Calibration in tension and compression up to 50 kN for the calibration of load cells, force gauges and push/pull gauges. Torque Wrench Calibration covering 1 to 1000 Nm for the calibration of torque wrenches and torque screwdrivers. Calibration can be undertaken to a selection of standards upon request. Balance and Scale Calibration from 1 mg to 500 kg for the calibration of laboratory balances, benchtop balances, benchtop scales, floor scales, aircraft scales, hanging scales, personal weigh scales and load cell platforms. All our mechanical, dimensional and physical calibrations are conducted under the guidelines of ISO/IEC 17025 throughout the laboratory process, including certificate reporting, measurements and traceability. A range of onsite calibration services are available for the support of automotive and aviation repair workshops. If you require, your calibrations can be added to our recall database for email reminders 30, 60 and 90 days prior to calibration due date.
Our capabilities include:
- Pressure Gauges
- Pressure Transducers
- Compound Gauges
- Pressure Indicators
- Load Cells
- Microscope
- Stop Watch
- Total Stations
- Tachometer
- Charpy Impact Testing Machines
- Compressors
- Level Transmitters
- Anemometers
- Pressure Transmitters
- Pressure Valves
- Pressure Controllers
- Dead Weight Testers
- Direct Shear Apparatus
- Force Indicators
- Force Gauges
- Force Transducers
- Force Sensors
- Dumpy Level
- Automatic Levels
- Vicker Hardness Testers
- Brinell Hardness Testers
- Rockwell Hardness Testers
- Lux Meter
- Magnetometer
Analytical and Maintenance
laboratories are accredited to ISO 17025. Our accreditation documentation is maintained by the Quality Manager (QM).
- Chromatography and Separation Analysis Equipment HPLC, UPLC, GC, GCMS, LC/MS etc.
- Compound Structures Analysis Equipment FT-IR, UV-VIS Spectrophotometer, XRD, NMR, NIR etc.
- Elemental Analysis Equipment ICP, ICP-MS, IC, TN Analyzer, NC Analyzer, XRF etc.
- Surface Analysis Equipment Microscope, Spectrometer, TDS etc.
- Thermal Analysis Equipment TG, DTA, DSC etc.
- Laboratory Equipment Flash Point Testers, Calorimeters, TOC Analyzers,
- Dew Point Analyzers, PH Meters, Conductivity Meters, Viscometers, Pour Point Testers etc.
- Chromatography and Separation Analysis Equipment HPLC, UPLC, GC, GCMS, LC/MS etc.
- Elemental Analysis Equipment ICP, ICP-MS, IC, TN Analyzer, NC Analyzer, XRF etc
- Surface Analysis Equipment Microscope, Spectrometer, TDS etc.
- Thermal Analysis Equipment TG, DTA, DSC etc.
- Laboratory Equipment Flash Point Testers, Calorimeters, TOC Analyzers
- Dew Point Analyzers, PH Meters, Conductivity Meters, Viscometers, Pour Point Testers etc.
Technical Univariate Verification International WLL is offering different types of maintenance services as mentioned below:
- Field Resident Engineers
- Fault Diagnosis of Equipment
- Preventive Maintenance Services
- Breakdown Maintenance servicesFurthermore, our maintenance program ensures that the equipment performs unfailingly, functions as anticipated and meets process requirements. A preventive maintenance program is based on the equipment manufacturer’s guidelines or on the conditions and period of operations. As a result, they should be managed to ensure that all equipment is in top condition and can produce safe products.